MyLoads Open the calculator →

260 Remington Load Data & Ballistics Calculator

Estimate chamber pressure and muzzle velocity for the 260 Remington with the free, in-browser MyLoads internal ballistics simulator. The figures below are illustrative estimates from a physics model — not a recommended load. Always cross-check a current published loading manual.

260 Remington reference

Maximum average pressure (MAP)60,000 psi
Nominal case capacity53.5 gr H₂O
Groove / bullet diameter0.264 in (6.71 mm)

Example simulation illustrative

Bullet
Sierra 6.5mm 264 Caliber (.264) 107 gr HPBT MatchKing
Powder
Alliant Reloder 16
Charge
38.8 gr
Barrel
24 in

Muzzle velocity

2,725 fps

Peak chamber pressure (interval, ±10% burn rate)

30,582 – 39,184 – 48,875 psi

nominal is 65% MAP (60,000 psi)

Pressure for this powder is extrapolated from a velocity-only fit — the pressure figures carry extra uncertainty in both directions.

Illustrative example — every figure is an estimate; always confirm your load against a current published manual before loading.

Popular 260 Remington powders

Powders and bullets handloaders commonly use for the 260 Remington, drawn from public discussion and listed most common first. They appear as the Popular group in the calculator's pickers. This is not a load recommendation — always check your load against a current published manual.

Popular 260 Remington bullets

Use MyLoads as a 260 Remington velocity and pressure calculator: it estimates muzzle velocity, muzzle energy and the full chamber-pressure curve for your own powder, charge and barrel length, compared against the reference facts above.

Open the 260 Remington in the MyLoads calculator →

More cartridges