MyLoads Open the calculator →

280 Remington Load Data & Ballistics Calculator

Estimate chamber pressure and muzzle velocity for the 280 Remington with the free, in-browser MyLoads internal ballistics simulator. The figures below are illustrative estimates from a physics model — not a recommended load. Always cross-check a current published loading manual.

280 Remington reference

Maximum average pressure (MAP)60,000 psi
Nominal case capacity67.0 gr H₂O
Groove / bullet diameter0.284 in (7.21 mm)

Example simulation illustrative

Bullet
Hornady 0.284 150 gr ELD-X
Powder
IMR 4350
Charge
46.5 gr
Barrel
22 in

Muzzle velocity

2,576 fps

Peak chamber pressure (interval, ±10% burn rate)

37,712 – 46,424 – 56,052 psi

nominal is 77% MAP (60,000 psi)

Illustrative example — every figure is an estimate; always confirm your load against a current published manual before loading.

Popular 280 Remington powders

Powders and bullets handloaders commonly use for the 280 Remington, drawn from public discussion and listed most common first. They appear as the Popular group in the calculator's pickers. This is not a load recommendation — always check your load against a current published manual.

Popular 280 Remington bullets

Use MyLoads as a 280 Remington velocity and pressure calculator: it estimates muzzle velocity, muzzle energy and the full chamber-pressure curve for your own powder, charge and barrel length, compared against the reference facts above.

Open the 280 Remington in the MyLoads calculator →

More cartridges