MyLoads Open the calculator →

30-06 Springfield Service Rifle Load Data & Ballistics Calculator

Estimate chamber pressure and muzzle velocity for the 30-06 Springfield Service Rifle with the free, in-browser MyLoads internal ballistics simulator. The figures below are illustrative estimates from a physics model — not a recommended load. Always cross-check a current published loading manual.

30-06 Springfield Service Rifle reference

Maximum average pressure (MAP)56,000 psi
Nominal case capacity69.1 gr H₂O
Groove / bullet diameter0.308 in (7.82 mm)

Example simulation illustrative

Bullet
Hornady 0.308 168 gr ELD Match
Powder
IMR 4895
Charge
43.3 gr
Barrel
24 in

Muzzle velocity

2,537 fps

Peak chamber pressure (interval, ±10% burn rate)

32,685 – 40,734 – 51,178 psi

nominal is 73% MAP (56,000 psi)

The simulator isn't optimized for this cartridge yet: there isn't enough published pressure data to check it.

Illustrative example — every figure is an estimate; always confirm your load against a current published manual before loading.

Popular 30-06 Springfield Service Rifle powders

Powders and bullets handloaders commonly use for the 30-06 Springfield Service Rifle, drawn from public discussion and listed most common first. They appear as the Popular group in the calculator's pickers. This is not a load recommendation — always check your load against a current published manual.

Popular 30-06 Springfield Service Rifle bullets

Use MyLoads as a 30-06 Springfield Service Rifle velocity and pressure calculator: it estimates muzzle velocity, muzzle energy and the full chamber-pressure curve for your own powder, charge and barrel length, compared against the reference facts above.

Open the 30-06 Springfield Service Rifle in the MyLoads calculator →

More cartridges