Estimate chamber pressure and muzzle velocity for the 32 S&W Long with the free, in-browser MyLoads internal ballistics simulator. The figures below are illustrative estimates from a physics model — not a recommended load. Always cross-check a current published loading manual.
| Maximum average pressure (MAP) | 1,000 BAR |
|---|---|
| Nominal case capacity | 15.0 gr H₂O |
| Groove / bullet diameter | 0.312 in (7.92 mm) |
Muzzle velocity
Peak chamber pressure (interval, ±10% burn rate)
nominal is 70% MAP (14,504 psi)
The simulator isn't optimized for this cartridge yet: there isn't enough published pressure data to check it.
Illustrative example — every figure is an estimate; always confirm your load against a current published manual before loading.
Powders and bullets handloaders commonly use for the 32 S&W Long, drawn from public discussion and listed most common first. They appear as the Popular group in the calculator's pickers. This is not a load recommendation — always check your load against a current published manual.
Use MyLoads as a 32 S&W Long velocity and pressure calculator: it estimates muzzle velocity, muzzle energy and the full chamber-pressure curve for your own powder, charge and barrel length, compared against the reference facts above.
Open the 32 S&W Long in the MyLoads calculator →