MyLoads Open the calculator →

6.5mm Remington Magnum Load Data & Ballistics Calculator

Estimate chamber pressure and muzzle velocity for the 6.5mm Remington Magnum with the free, in-browser MyLoads internal ballistics simulator. The figures below are illustrative estimates from a physics model — not a recommended load. Always cross-check a current published loading manual.

6.5mm Remington Magnum reference

Maximum average pressure (MAP)4,350 BAR
Nominal case capacity68.5 gr H₂O
Groove / bullet diameter0.264 in (6.71 mm)

Example simulation illustrative

Bullet
Hornady 0.264 140 gr BTHP Match
Powder
Hodgdon H4831
Charge
49.1 gr
Barrel
24 in

Muzzle velocity

2,665 fps

Peak chamber pressure (interval, ±10% burn rate)

43,570 – 52,677 – 62,621 psi

nominal is 83% MAP (63,091 psi)

The simulator isn't optimized for this cartridge yet and may read pressure high.

Illustrative example — every figure is an estimate; always confirm your load against a current published manual before loading.

Popular 6.5mm Remington Magnum powders

Powders and bullets handloaders commonly use for the 6.5mm Remington Magnum, drawn from public discussion and listed most common first. They appear as the Popular group in the calculator's pickers. This is not a load recommendation — always check your load against a current published manual.

Popular 6.5mm Remington Magnum bullets

Use MyLoads as a 6.5mm Remington Magnum velocity and pressure calculator: it estimates muzzle velocity, muzzle energy and the full chamber-pressure curve for your own powder, charge and barrel length, compared against the reference facts above.

Open the 6.5mm Remington Magnum in the MyLoads calculator →

More cartridges